Lava

Lava Z41

Lava_Z41_V1.0_S114_20190812_SPD.zip
June 16, 2026 Lava 904 MB Lava

Lava Z41 is a Lava firmware file listed under Lava, distributed as Lava_Z41_V1.0_S114_20190812_SPD.zip with a download size of 904 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of August 12, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
904 MB
Download Free

About Lava Z41

If your Lava Z41 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava Z41 to factory condition. File Name: Lava_Z41_V1.0_S114_20190812_SPD.zip File Size: 904 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Lava Z41 should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameLava Z41
PackageLava_Z41_V1.0_S114_20190812_SPD.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Build dateAugust 12, 2019
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size904 MB
Date addedJune 16, 2026
PriceFree

How to flash Lava Z41 with SPD ResearchDownload

  1. Confirm Lava Z41 matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (904 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava Z41 free to download?

Yes, Lava Z41 can be downloaded free of charge from this page.

How large is the download?

The Lava Z41 package is 904 MB.

Which tool do I need to flash Lava Z41?

Lava Z41 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava