Lava

Lava Z3

Lava_Z3_UP_MT6765_SW_V01_HW_V2.0.0_220508.zip
June 16, 2026 Lava 2.00 GB Lava

Lava Z3 is a Lava firmware file listed under Lava, distributed as Lava_Z3_UP_MT6765_SW_V01_HW_V2.0.0_220508.zip with a download size of 2.00 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2.00 GB
Download Free

About Lava Z3

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lava Z3 owners, this page hosts the original Lava stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lava_Z3_UP_MT6765_SW_V01_HW_V2.0.0_220508.zip File Size: 2.00 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Lava Z3 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameLava Z3
PackageLava_Z3_UP_MT6765_SW_V01_HW_V2.0.0_220508.zip
Brand / PlatformLava
CategoryLava
ChipsetMediaTek MT6765
Flash toolSP Flash Tool
Package formatZIP archive
File size2.00 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava Z3 with SP Flash Tool

  1. Confirm Lava Z3 matches your exact device model and that the phone uses the MT6765 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2.00 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Lava Z3 free to download?

Yes, Lava Z3 can be downloaded free of charge from this page.

How large is the download?

The Lava Z3 package is 2.00 GB.

Which tool do I need to flash Lava Z3?

Lava Z3 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava