Lava Z1S LZG402
Lava Z1S LZG402 is a Lava firmware file listed under Lava, distributed as Lava_Z1S_LZG402_SW_V04_HW_V2.0_220331_SPD.zip with a download size of 1.33 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lava Z1S LZG402
Looking for the official stock firmware for your Lava Z1S LZG402? You're in the right place. Below is the original Lava flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lava_Z1S_LZG402_SW_V04_HW_V2.0_220331_SPD.zip File Size: 1.33 GB Back up your files, charge the Lava Z1S LZG402 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Lava Z1S LZG402 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Lava Z1S LZG402 |
|---|---|
| Package | Lava_Z1S_LZG402_SW_V04_HW_V2.0_220331_SPD.zip |
| Brand / Platform | Lava |
| Category | Lava |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1.33 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lava Z1S LZG402 with SPD ResearchDownload
- Confirm Lava Z1S LZG402 matches your exact device model and that it is intended for Lava hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.33 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Lava Z1S LZG402 free to download?
Yes, Lava Z1S LZG402 can be downloaded free of charge from this page.
How large is the download?
The Lava Z1S LZG402 package is 1.33 GB.
Which tool do I need to flash Lava Z1S LZG402?
Lava Z1S LZG402 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Lava devices. Always confirm it matches your specific model before flashing.