Lava

Lava Y50 Pro

Lava_Y50_Pro_2_16_S319_INT_20L04_090957_9.0_SPD.zip
June 16, 2026 Lava 1.00 GB Lava

Lava Y50 Pro is a Lava firmware file listed under Lava, distributed as Lava_Y50_Pro_2_16_S319_INT_20L04_090957_9.0_SPD.zip with a download size of 1.00 GB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 9 (Pie). It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.00 GB
Download Free

About Lava Y50 Pro

The Lava Y50 Pro runs on Lava's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Lava Y50 Pro back to square one. File Name: Lava_Y50_Pro_2_16_S319_INT_20L04_090957_9.0_SPD.zip File Size: 1.00 GB Back up your files, charge the Lava Y50 Pro past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Lava Y50 Pro should run like a brand new unit.

File Details

File nameLava Y50 Pro
PackageLava_Y50_Pro_2_16_S319_INT_20L04_090957_9.0_SPD.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Android versionAndroid 9 (Pie)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.00 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava Y50 Pro with SPD ResearchDownload

  1. Confirm Lava Y50 Pro matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.00 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava Y50 Pro free to download?

Yes, Lava Y50 Pro can be downloaded free of charge from this page.

How large is the download?

The Lava Y50 Pro package is 1.00 GB.

Which tool do I need to flash Lava Y50 Pro?

Lava Y50 Pro is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

What Android version is Lava Y50 Pro?

This firmware is Android 9 (Pie).

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava