Lava

Lava X50 Plus

Lava_X50_Plus_S112_SPD_20161114.zip
April 28, 2026 Lava 1 GB Lava

Lava X50 Plus is a Lava firmware file listed under Lava, distributed as Lava_X50_Plus_S112_SPD_20161114.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of November 14, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Lava X50 Plus

Lava X50 Plus Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Lava_X50_Plus_S112_SPD_20161114.zip File Size: 1 GB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial (Mediafire)

File Details

File nameLava X50 Plus
PackageLava_X50_Plus_S112_SPD_20161114.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Build dateNovember 14, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1 GB
Date addedApril 28, 2026
PriceFree

How to flash Lava X50 Plus with SPD ResearchDownload

  1. Confirm Lava X50 Plus matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava X50 Plus free to download?

Yes, Lava X50 Plus can be downloaded free of charge from this page.

How large is the download?

The Lava X50 Plus package is 1 GB.

Which tool do I need to flash Lava X50 Plus?

Lava X50 Plus is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava