Lava

Lava X41

Lava_X41_S112_161207_SPD.zip
June 16, 2026 Lava 1.12 GB Lava

Lava X41 is a Lava firmware file listed under Lava, distributed as Lava_X41_S112_161207_SPD.zip with a download size of 1.12 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.12 GB
Download Free

About Lava X41

Looking for the official stock firmware for your Lava X41? You're in the right place. Below is the original Lava flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava X41 to factory condition. File Name: Lava_X41_S112_161207_SPD.zip File Size: 1.12 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Lava X41 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameLava X41
PackageLava_X41_S112_161207_SPD.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.12 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava X41 with SPD ResearchDownload

  1. Confirm Lava X41 matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.12 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava X41 free to download?

Yes, Lava X41 can be downloaded free of charge from this page.

How large is the download?

The Lava X41 package is 1.12 GB.

Which tool do I need to flash Lava X41?

Lava X41 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava