Lava

Lava W1

Lava_W1_SC7702_2015_FSPD.zip
April 28, 2026 Lava 13.59 MB Lava

Lava W1 is a Lava firmware file listed under Lava, distributed as Lava_W1_SC7702_2015_FSPD.zip with a download size of 13.59 MB. It is built for the Unisoc (Spreadtrum) SC7702 chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
13.59 MB
Download Free

About Lava W1

Lava W1 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Lava_W1_SC7702_2015_FSPD.zip File Size: 13.59 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial Get Link

File Details

File nameLava W1
PackageLava_W1_SC7702_2015_FSPD.zip
Brand / PlatformLava
CategoryLava
ChipsetUnisoc (Spreadtrum) SC7702
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size13.59 MB
Date addedApril 28, 2026
PriceFree

How to flash Lava W1 with SPD ResearchDownload

  1. Confirm Lava W1 matches your exact device model and that the phone uses the SC7702 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (13.59 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava W1 free to download?

Yes, Lava W1 can be downloaded free of charge from this page.

How large is the download?

The Lava W1 package is 13.59 MB.

Which tool do I need to flash Lava W1?

Lava W1 is Unisoc (Spreadtrum) SC7702 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava