Lava V2S Plus
Lava V2S Plus is a Lava firmware file listed under Lava, distributed as Lava_V2S_Plus_MT6735_S105_04272016_5.1.zip with a download size of 972 MB. It is built for the MediaTek MT6735 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lava V2S Plus
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lava V2S Plus owners, this page hosts the original Lava stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava V2S Plus to factory condition. File Name: Lava_V2S_Plus_MT6735_S105_04272016_5.1.zip File Size: 972 MB Back up your files, charge the Lava V2S Plus past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Lava V2S Plus should run like a brand new unit.
File Details
| File name | Lava V2S Plus |
|---|---|
| Package | Lava_V2S_Plus_MT6735_S105_04272016_5.1.zip |
| Brand / Platform | Lava |
| Category | Lava |
| Chipset | MediaTek MT6735 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 972 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lava V2S Plus with SP Flash Tool
- Confirm Lava V2S Plus matches your exact device model and that the phone uses the MT6735 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (972 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Lava V2S Plus free to download?
Yes, Lava V2S Plus can be downloaded free of charge from this page.
How large is the download?
The Lava V2S Plus package is 972 MB.
Which tool do I need to flash Lava V2S Plus?
Lava V2S Plus is MediaTek MT6735 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Lava V2S Plus?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Lava devices. Always confirm it matches your specific model before flashing.