Lava

Lava LN9821

Lava_LN9821_INT_S101_19F26_26062019_SPD.zip
June 16, 2026 Lava 734 MB Lava

Lava LN9821 is a Lava firmware file listed under Lava, distributed as Lava_LN9821_INT_S101_19F26_26062019_SPD.zip with a download size of 734 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of June 26, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
734 MB
Download Free

About Lava LN9821

The Lava LN9821 runs on Lava's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava LN9821 to factory condition. File Name: Lava_LN9821_INT_S101_19F26_26062019_SPD.zip File Size: 734 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Lava LN9821 should run like a brand new unit.

File Details

File nameLava LN9821
PackageLava_LN9821_INT_S101_19F26_26062019_SPD.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Build dateJune 26, 2019
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size734 MB
Date addedJune 16, 2026
PriceFree

How to flash Lava LN9821 with SPD ResearchDownload

  1. Confirm Lava LN9821 matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (734 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava LN9821 free to download?

Yes, Lava LN9821 can be downloaded free of charge from this page.

How large is the download?

The Lava LN9821 package is 734 MB.

Which tool do I need to flash Lava LN9821?

Lava LN9821 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava