Lava

Lava LN9820

Lava_LN9820_INT_S104_18L10_10122018_SPD.zip.zip
June 16, 2026 Lava 739 MB Lava

Lava LN9820 is a Lava firmware file listed under Lava, distributed as Lava_LN9820_INT_S104_18L10_10122018_SPD.zip.zip with a download size of 739 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of December 10, 2018. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
739 MB
Download Free

About Lava LN9820

Looking for the official stock firmware for your Lava LN9820? You're in the right place. Below is the original Lava flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lava LN9820 a fresh start without the clutter that builds up over time. File Name: Lava_LN9820_INT_S104_18L10_10122018_SPD.zip.zip File Size: 739 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Lava LN9820 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameLava LN9820
PackageLava_LN9820_INT_S104_18L10_10122018_SPD.zip.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Build dateDecember 10, 2018
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size739 MB
Date addedJune 16, 2026
PriceFree

How to flash Lava LN9820 with SPD ResearchDownload

  1. Confirm Lava LN9820 matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (739 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava LN9820 free to download?

Yes, Lava LN9820 can be downloaded free of charge from this page.

How large is the download?

The Lava LN9820 package is 739 MB.

Which tool do I need to flash Lava LN9820?

Lava LN9820 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava