Lava

Lava LF9810

Lava_LF9810_MT6761_2GB_V1.0_S128_05082019.zip.zip.zip.zip
June 16, 2026 Lava 2 GB Lava

Lava LF9810 is a Lava firmware file listed under Lava, distributed as Lava_LF9810_MT6761_2GB_V1.0_S128_05082019.zip.zip.zip.zip with a download size of 2 GB. It is built for the MediaTek MT6761 chipset, with a firmware build date of August 05, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2 GB
Download Free

About Lava LF9810

Looking for the official stock firmware for your Lava LF9810? You're in the right place. Below is the original Lava flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava LF9810 to factory condition. File Name: Lava_LF9810_MT6761_2GB_V1.0_S128_05082019.zip.zip.zip.zip File Size: 2 GB Back up your files, charge the Lava LF9810 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Lava LF9810 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameLava LF9810
PackageLava_LF9810_MT6761_2GB_V1.0_S128_05082019.zip.zip.zip.zip
Brand / PlatformLava
CategoryLava
ChipsetMediaTek MT6761
Build dateAugust 05, 2019
Flash toolSP Flash Tool
Package formatZIP archive
File size2 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava LF9810 with SP Flash Tool

  1. Confirm Lava LF9810 matches your exact device model and that the phone uses the MT6761 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Lava LF9810 free to download?

Yes, Lava LF9810 can be downloaded free of charge from this page.

How large is the download?

The Lava LF9810 package is 2 GB.

Which tool do I need to flash Lava LF9810?

Lava LF9810 is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava