Lava

Lava KKT29

Lava_KKT29_MT6250_S214_20130308_MIRA.zip
June 16, 2026 Lava 6 MB Lava

Lava KKT29 is a Lava firmware file listed under Lava, distributed as Lava_KKT29_MT6250_S214_20130308_MIRA.zip with a download size of 6 MB. It is built for the MediaTek MT6250 chipset, with a firmware build date of March 08, 2013. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
6 MB
Download Free

About Lava KKT29

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lava KKT29 owners, this page hosts the original Lava stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lava KKT29 a fresh start without the clutter that builds up over time. File Name: Lava_KKT29_MT6250_S214_20130308_MIRA.zip File Size: 6 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Lava KKT29 should run like a brand new unit.

File Details

File nameLava KKT29
PackageLava_KKT29_MT6250_S214_20130308_MIRA.zip
Brand / PlatformLava
CategoryLava
ChipsetMediaTek MT6250
Build dateMarch 08, 2013
Flash toolSP Flash Tool
Package formatZIP archive
File size6 MB
Date addedJune 16, 2026
PriceFree

How to flash Lava KKT29 with SP Flash Tool

  1. Confirm Lava KKT29 matches your exact device model and that the phone uses the MT6250 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (6 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Lava KKT29 free to download?

Yes, Lava KKT29 can be downloaded free of charge from this page.

How large is the download?

The Lava KKT29 package is 6 MB.

Which tool do I need to flash Lava KKT29?

Lava KKT29 is MediaTek MT6250 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava