Lava

Lava KKT27

Lava_KKT27_SC6531_20130829_MIRA.zip.zip
June 16, 2026 Lava 6 MB Lava

Lava KKT27 is a Lava firmware file listed under Lava, distributed as Lava_KKT27_SC6531_20130829_MIRA.zip.zip with a download size of 6 MB. It is built for the Unisoc (Spreadtrum) SC6531 chipset, with a firmware build date of August 29, 2013. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
6 MB
Download Free

About Lava KKT27

If your Lava KKT27 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Lava KKT27 back to square one. File Name: Lava_KKT27_SC6531_20130829_MIRA.zip.zip File Size: 6 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Lava KKT27 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameLava KKT27
PackageLava_KKT27_SC6531_20130829_MIRA.zip.zip
Brand / PlatformLava
CategoryLava
ChipsetUnisoc (Spreadtrum) SC6531
Build dateAugust 29, 2013
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size6 MB
Date addedJune 16, 2026
PriceFree

How to flash Lava KKT27 with SPD ResearchDownload

  1. Confirm Lava KKT27 matches your exact device model and that the phone uses the SC6531 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (6 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava KKT27 free to download?

Yes, Lava KKT27 can be downloaded free of charge from this page.

How large is the download?

The Lava KKT27 package is 6 MB.

Which tool do I need to flash Lava KKT27?

Lava KKT27 is Unisoc (Spreadtrum) SC6531 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava