Lava KKT20
Lava KKT20 is a Lava firmware file listed under Lava, distributed as Lava_KKT20_SC6531_4MB_MIRA.zip with a download size of 4 MB. It is built for the Unisoc (Spreadtrum) SC6531 chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lava KKT20
If your Lava KKT20 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Lava KKT20 back to square one. File Name: Lava_KKT20_SC6531_4MB_MIRA.zip File Size: 4 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Lava KKT20 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Lava KKT20 |
|---|---|
| Package | Lava_KKT20_SC6531_4MB_MIRA.zip |
| Brand / Platform | Lava |
| Category | Lava |
| Chipset | Unisoc (Spreadtrum) SC6531 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 4 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lava KKT20 with SPD ResearchDownload
- Confirm Lava KKT20 matches your exact device model and that the phone uses the SC6531 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (4 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Lava KKT20 free to download?
Yes, Lava KKT20 can be downloaded free of charge from this page.
How large is the download?
The Lava KKT20 package is 4 MB.
Which tool do I need to flash Lava KKT20?
Lava KKT20 is Unisoc (Spreadtrum) SC6531 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Lava devices. Always confirm it matches your specific model before flashing.