Lava KKT Uno Plus
Lava KKT Uno Plus is a Lava firmware file listed under Lava, distributed as Lava_KKT_Uno_Plus_SC6531_MIRA.zip with a download size of 4 MB. It is built for the Unisoc (Spreadtrum) SC6531 chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lava KKT Uno Plus
If your Lava KKT Uno Plus has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lava KKT Uno Plus a fresh start without the clutter that builds up over time. File Name: Lava_KKT_Uno_Plus_SC6531_MIRA.zip File Size: 4 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Lava KKT Uno Plus restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Lava KKT Uno Plus |
|---|---|
| Package | Lava_KKT_Uno_Plus_SC6531_MIRA.zip |
| Brand / Platform | Lava |
| Category | Lava |
| Chipset | Unisoc (Spreadtrum) SC6531 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 4 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lava KKT Uno Plus with SPD ResearchDownload
- Confirm Lava KKT Uno Plus matches your exact device model and that the phone uses the SC6531 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (4 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Lava KKT Uno Plus free to download?
Yes, Lava KKT Uno Plus can be downloaded free of charge from this page.
How large is the download?
The Lava KKT Uno Plus package is 4 MB.
Which tool do I need to flash Lava KKT Uno Plus?
Lava KKT Uno Plus is Unisoc (Spreadtrum) SC6531 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Lava devices. Always confirm it matches your specific model before flashing.