Lava

Lava Iris 43

Lava_Iris_43_1GB_16GB_S110_INT_100820_SPD.zip.zip.zip
June 16, 2026 Lava 819 MB Lava

Lava Iris 43 is a Lava firmware file listed under Lava, distributed as Lava_Iris_43_1GB_16GB_S110_INT_100820_SPD.zip.zip.zip with a download size of 819 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
819 MB
Download Free

About Lava Iris 43

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lava Iris 43 owners, this page hosts the original Lava stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Lava Iris 43 back to square one. File Name: Lava_Iris_43_1GB_16GB_S110_INT_100820_SPD.zip.zip.zip File Size: 819 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Lava Iris 43 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameLava Iris 43
PackageLava_Iris_43_1GB_16GB_S110_INT_100820_SPD.zip.zip.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size819 MB
Date addedJune 16, 2026
PriceFree

How to flash Lava Iris 43 with SPD ResearchDownload

  1. Confirm Lava Iris 43 matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (819 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava Iris 43 free to download?

Yes, Lava Iris 43 can be downloaded free of charge from this page.

How large is the download?

The Lava Iris 43 package is 819 MB.

Which tool do I need to flash Lava Iris 43?

Lava Iris 43 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava