Lava

Lava E10

Lava_E10_SC6531E_W25Q32BV_MIRA.zip
April 28, 2026 Lava 3 MB Lava

Lava E10 is a Lava firmware file listed under Lava, distributed as Lava_E10_SC6531E_W25Q32BV_MIRA.zip with a download size of 3 MB. It is built for the Unisoc (Spreadtrum) SC6531E chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
3 MB
Download Free

About Lava E10

Lava E10 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Lava_E10_SC6531E_W25Q32BV_MIRA.zip File Size: 3 MB Flash Tool: Miracle Tool How to Flash (install): Use Miracle Box Software to Flash the firmware. Get Link

File Details

File nameLava E10
PackageLava_E10_SC6531E_W25Q32BV_MIRA.zip
Brand / PlatformLava
CategoryLava
ChipsetUnisoc (Spreadtrum) SC6531E
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size3 MB
Date addedApril 28, 2026
PriceFree

How to flash Lava E10 with SPD ResearchDownload

  1. Confirm Lava E10 matches your exact device model and that the phone uses the SC6531E chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (3 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava E10 free to download?

Yes, Lava E10 can be downloaded free of charge from this page.

How large is the download?

The Lava E10 package is 3 MB.

Which tool do I need to flash Lava E10?

Lava E10 is Unisoc (Spreadtrum) SC6531E firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava