Lava

Lava Blaze LZX403

Lava_Blaze_LZX403_MT6761_SW_V09_HW_V1.0_220707.zip
June 16, 2026 Lava 2.21 GB Lava

Lava Blaze LZX403 is a Lava firmware file listed under Lava, distributed as Lava_Blaze_LZX403_MT6761_SW_V09_HW_V1.0_220707.zip with a download size of 2.21 GB. It is built for the MediaTek MT6761 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2.21 GB
Download Free

About Lava Blaze LZX403

If your Lava Blaze LZX403 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Lava Blaze LZX403 back to square one. File Name: Lava_Blaze_LZX403_MT6761_SW_V09_HW_V1.0_220707.zip File Size: 2.21 GB Back up your files, charge the Lava Blaze LZX403 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Lava Blaze LZX403 should run like a brand new unit.

File Details

File nameLava Blaze LZX403
PackageLava_Blaze_LZX403_MT6761_SW_V09_HW_V1.0_220707.zip
Brand / PlatformLava
CategoryLava
ChipsetMediaTek MT6761
Flash toolSP Flash Tool
Package formatZIP archive
File size2.21 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava Blaze LZX403 with SP Flash Tool

  1. Confirm Lava Blaze LZX403 matches your exact device model and that the phone uses the MT6761 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2.21 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Lava Blaze LZX403 free to download?

Yes, Lava Blaze LZX403 can be downloaded free of charge from this page.

How large is the download?

The Lava Blaze LZX403 package is 2.21 GB.

Which tool do I need to flash Lava Blaze LZX403?

Lava Blaze LZX403 is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava