Lava

Lava B1

Lava_B1_SW14_20160121_SPD.ZIP
June 16, 2026 Lava 105 MB Lava

Lava B1 is a Lava firmware file listed under Lava, distributed as Lava_B1_SW14_20160121_SPD.ZIP with a download size of 105 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of January 21, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
105 MB
Download Free

About Lava B1

The Lava B1 runs on Lava's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava B1 to factory condition. File Name: Lava_B1_SW14_20160121_SPD.ZIP File Size: 105 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Lava B1 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameLava B1
PackageLava_B1_SW14_20160121_SPD.ZIP
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Build dateJanuary 21, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size105 MB
Date addedJune 16, 2026
PriceFree

How to flash Lava B1 with SPD ResearchDownload

  1. Confirm Lava B1 matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (105 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava B1 free to download?

Yes, Lava B1 can be downloaded free of charge from this page.

How large is the download?

The Lava B1 package is 105 MB.

Which tool do I need to flash Lava B1?

Lava B1 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava