Lava

Lava Atom 2X

Lava_Atom_2X_S102L_20151015_SPD.zip
June 16, 2026 Lava 743 MB Lava

Lava Atom 2X is a Lava firmware file listed under Lava, distributed as Lava_Atom_2X_S102L_20151015_SPD.zip with a download size of 743 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of October 15, 2015. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
743 MB
Download Free

About Lava Atom 2X

Looking for the official stock firmware for your Lava Atom 2X? You're in the right place. Below is the original Lava flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lava Atom 2X a fresh start without the clutter that builds up over time. File Name: Lava_Atom_2X_S102L_20151015_SPD.zip File Size: 743 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Lava Atom 2X restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameLava Atom 2X
PackageLava_Atom_2X_S102L_20151015_SPD.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Build dateOctober 15, 2015
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size743 MB
Date addedJune 16, 2026
PriceFree

How to flash Lava Atom 2X with SPD ResearchDownload

  1. Confirm Lava Atom 2X matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (743 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava Atom 2X free to download?

Yes, Lava Atom 2X can be downloaded free of charge from this page.

How large is the download?

The Lava Atom 2X package is 743 MB.

Which tool do I need to flash Lava Atom 2X?

Lava Atom 2X is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava