Lava

Lava ARC 6

Lava_ARC_6_S104_20131231_SPD.zip
April 28, 2026 Lava 3 MB Lava

Lava ARC 6 is a Lava firmware file listed under Lava, distributed as Lava_ARC_6_S104_20131231_SPD.zip with a download size of 3 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of December 31, 2013. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
3 MB
Download Free

About Lava ARC 6

Lava ARC 6 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Lava_ARC_6_S104_20131231_SPD.zip File Size: 3 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial (Mediafire)

File Details

File nameLava ARC 6
PackageLava_ARC_6_S104_20131231_SPD.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Build dateDecember 31, 2013
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size3 MB
Date addedApril 28, 2026
PriceFree

How to flash Lava ARC 6 with SPD ResearchDownload

  1. Confirm Lava ARC 6 matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (3 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava ARC 6 free to download?

Yes, Lava ARC 6 can be downloaded free of charge from this page.

How large is the download?

The Lava ARC 6 package is 3 MB.

Which tool do I need to flash Lava ARC 6?

Lava ARC 6 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava