Lava

Lava Arc 225

Lava_Arc_225_MT6765_SW_V05_HW_V2.0_220513.zip
June 16, 2026 Lava 1.60 GB Lava

Lava Arc 225 is a Lava firmware file listed under Lava, distributed as Lava_Arc_225_MT6765_SW_V05_HW_V2.0_220513.zip with a download size of 1.60 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.60 GB
Download Free

About Lava Arc 225

If your Lava Arc 225 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lava_Arc_225_MT6765_SW_V05_HW_V2.0_220513.zip File Size: 1.60 GB Back up your files, charge the Lava Arc 225 past 50 percent, install the matching drivers, and only then begin. When it finishes, the Lava Arc 225 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameLava Arc 225
PackageLava_Arc_225_MT6765_SW_V05_HW_V2.0_220513.zip
Brand / PlatformLava
CategoryLava
ChipsetMediaTek MT6765
Flash toolSP Flash Tool
Package formatZIP archive
File size1.60 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava Arc 225 with SP Flash Tool

  1. Confirm Lava Arc 225 matches your exact device model and that the phone uses the MT6765 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.60 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Lava Arc 225 free to download?

Yes, Lava Arc 225 can be downloaded free of charge from this page.

How large is the download?

The Lava Arc 225 package is 1.60 GB.

Which tool do I need to flash Lava Arc 225?

Lava Arc 225 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava