Archos 101C Copper
Archos 101C Copper is a Archos firmware file listed under Archos, distributed as Archos_101C_Copper_MT6580_20160329.zip with a download size of 865 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of March 29, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Archos 101C Copper
If your Archos 101C Copper has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Archos flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Archos 101C Copper to factory condition. File Name: Archos_101C_Copper_MT6580_20160329.zip File Size: 865 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Archos 101C Copper should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Archos 101C Copper |
|---|---|
| Package | Archos_101C_Copper_MT6580_20160329.zip |
| Brand / Platform | Archos |
| Category | Archos |
| Chipset | MediaTek MT6580 |
| Build date | March 29, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 865 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Archos 101C Copper with SP Flash Tool
- Confirm Archos 101C Copper matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (865 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Archos 101C Copper free to download?
Yes, Archos 101C Copper can be downloaded free of charge from this page.
How large is the download?
The Archos 101C Copper package is 865 MB.
Which tool do I need to flash Archos 101C Copper?
Archos 101C Copper is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Archos devices. Always confirm it matches your specific model before flashing.