Archos 101C Helium
Archos 101C Helium is a Archos firmware file listed under Archos, distributed as Archos_101C_Helium_MT6737M_V13_20170427.zip with a download size of 790 MB. It is built for the MediaTek MT6737M chipset, with a firmware build date of April 27, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 3 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Archos 101C Helium
The Archos 101C Helium runs on Archos's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Archos 101C Helium a fresh start without the clutter that builds up over time. File Name: Archos_101C_Helium_MT6737M_V13_20170427.zip File Size: 790 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Archos 101C Helium should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Archos 101C Helium |
|---|---|
| Package | Archos_101C_Helium_MT6737M_V13_20170427.zip |
| Brand / Platform | Archos |
| Category | Archos |
| Chipset | MediaTek MT6737M |
| Build date | April 27, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 790 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Archos 101C Helium with SP Flash Tool
- Confirm Archos 101C Helium matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (790 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Archos 101C Helium free to download?
Yes, Archos 101C Helium can be downloaded free of charge from this page.
How large is the download?
The Archos 101C Helium package is 790 MB.
Which tool do I need to flash Archos 101C Helium?
Archos 101C Helium is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Archos devices. Always confirm it matches your specific model before flashing.