Archos 101C Xenon
Archos 101C Xenon is a Archos firmware file listed under Archos, distributed as Archos_101C_Xenon_MT6580_V13_K104_20170603.zip with a download size of 763 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of June 03, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Archos 101C Xenon
Looking for the official stock firmware for your Archos 101C Xenon? You're in the right place. Below is the original Archos flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Archos_101C_Xenon_MT6580_V13_K104_20170603.zip File Size: 763 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Archos 101C Xenon returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Archos 101C Xenon |
|---|---|
| Package | Archos_101C_Xenon_MT6580_V13_K104_20170603.zip |
| Brand / Platform | Archos |
| Category | Archos |
| Chipset | MediaTek MT6580 |
| Build date | June 03, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 763 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Archos 101C Xenon with SP Flash Tool
- Confirm Archos 101C Xenon matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (763 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Archos 101C Xenon free to download?
Yes, Archos 101C Xenon can be downloaded free of charge from this page.
How large is the download?
The Archos 101C Xenon package is 763 MB.
Which tool do I need to flash Archos 101C Xenon?
Archos 101C Xenon is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Archos devices. Always confirm it matches your specific model before flashing.