Intex Firmware Guide: Finding and Flashing Stock ROMs

To reflash or unbrick an Intex device, you must use a stock ROM that matches your specific model and the corresponding flashing tool for its chipset. Most Intex devices utilize either MediaTek or Unisoc (Spreadtrum) hardware, requiring either SP Flash Tool or SPD ResearchDownload to restore the system.

Safety Precautions Before Flashing Intex Devices

Flashing firmware is a high-risk operation that can permanently damage your device if performed incorrectly. Before starting, adhere to these safety guidelines:

  1. Verify Model Accuracy: Always confirm that the firmware matches the exact device model. Installing firmware for a similar but different model can lead to a hard brick.
  2. Back Up Your Data: Flashing typically erases all user data. Ensure all important files, contacts, and media are backed up to external storage.
  3. Power Management: Keep the battery charged above 50%. A power failure during the flashing process can corrupt the bootloader.
  4. Maintain Connection: Do not disconnect the USB cable or restart the computer while the flashing process is active.
  5. Preserve Calibration Data:
    • For MediaTek devices, use the "Download Only" mode. Avoid "Format All + Download," as this erases the IMEI and NVRAM calibration.
    • For SPD/Unisoc devices, leave the "Erase NV" option unticked to prevent wiping the IMEI and calibration data.

Security bypasses, including FRP (Google account) removal, IMEI changing, or carrier-lock circumvention, are out of scope for this guide.

Identifying Your Intex Chipset and Android Version

Choosing the wrong tool or firmware is the primary cause of flashing failures. Intex devices are built on various platforms, and the tool you use depends entirely on the chipset.

Common Chipsets

Based on recent data from our library, Intex devices frequently use the following chipsets:

  • MediaTek (MTK): Common versions include the MT6737M, MT6735M, MT6580, MT6737, MT6261, MT6572, MT6582, MT6592, MT6735, and MT6260.
  • Unisoc / Spreadtrum (SPD): These devices typically use .pac firmware files and require SPD-specific tools.

Android Versions

Intex devices span several generations of Android. Depending on the model, you may encounter: * Android 7.0 * Android 6.0 * Android 5.1 * Android 5.0 * Android 4.4 * Android 4.2 * Android 4.0

You can usually find this information in the device settings under "About Phone" or by checking the hardware specifications on the original packaging.

Choosing the Correct Stock ROM File

With 919 Intex files available in our library, selecting the precise version is critical. A stock ROM is the original software provided by the manufacturer; using a modified or incorrect ROM can cause boot loops.

When searching for a file in the /category/intex section, look for the following identifiers:

  1. Model Name: Ensure the filename matches your device (e.g., "Lions 6" or "Cloud Zest").
  2. Region/Version: Some files are designated for specific regions (e.g., "IND" for India).
  3. File Extension:
    • .pac files are used for Unisoc/Spreadtrum devices.
    • Scatter files (usually within a ZIP) are used for MediaTek devices.

If you are unsure which file to choose, check the version number in your current system settings and match it with the version listed in the firmware package name.

Flashing Unisoc (Spreadtrum) Devices with SPD ResearchDownload

Devices powered by Unisoc (Spreadtrum) chipsets require the SPD ResearchDownload tool (or UpgradeDownload). This process involves loading a single .pac file and putting the device into a specific connection mode.

Prerequisites

  • Tool: SPD ResearchDownload or UpgradeDownload.
  • Drivers: Install the SPD / Unisoc USB drivers on your PC.
  • Firmware: A compatible .pac firmware file.

Flashing Steps

  1. Launch the SPD ResearchDownload tool on your computer.
  2. Load the .pac firmware file into the tool.
  3. Ensure the "Erase NV" option is unticked to avoid wiping your IMEI and calibration data.
  4. Click the Start button in the tool to put it in waiting mode.
  5. Power off the phone completely.
  6. Hold the Volume Down (boot key) and connect the device to the PC via USB.
  7. Release the button once the tool detects the device and begins the flashing process.

For more detailed instructions on the connection process, refer to our guide on /blog/connecting-unisoc-phones-to-spd-researchdownload or the general /blog/how-to-use-spd-researchdownload-firmware-flashing-guide.

Flashing MediaTek Devices with SP Flash Tool

MediaTek devices are flashed using the SP Flash Tool. Unlike SPD tools, this tool relies on a "Scatter file" to map where different partitions of the firmware are written to the flash memory.

Prerequisites

Flashing Steps

  1. Open SP Flash Tool.
  2. In the "Scatter-loading File" field, click choose and select the scatter file from your firmware folder.
  3. Select the flashing mode. Crucial: Select "Download Only". Do not use "Format All + Download," as this will erase your IMEI and NVRAM. For a detailed explanation of this risk, see /blog/sp-flash-tool-download-only-vs-format-all-download.
  4. Click the Download button.
  5. Power off the device completely.
  6. Connect the device to the PC via USB. The tool should detect the phone and a progress bar will appear at the bottom.
  7. Once a green checkmark appears, the process is complete.

If you encounter errors during this process, such as the common DRAM failure, refer to /blog/fix-sp-flash-tool-error-4032-s-ft-enable-dram-fail. For a comprehensive walkthrough, visit /blog/how-to-use-sp-flash-tool-mediatek-firmware-flashing-guide.

Example Intex Firmware Files

Below are examples of stock firmware available in our library. These files demonstrate the variety of sizes and naming conventions used for different Intex models.

Device Model Package Name Size Download Link
Intex Lions 6 Intex_Lions_6_V08_IN_14082018_SPD.zip 763 MB /file/intex-lions-6-102723
Intex Infie 33 Intex_Infie_33_180709_CPB.zip 2 GB /file/intex-infie-33-102713
Intex Fulvu E5 Intex_Fulvu_E5_V01_20171117_Indian_7.0_SPD.zip 2 GB /file/intex-fulvu-e5-102686
Intex Cloud Matte Intex_Cloud_Matte_V06_Indian_SER_20160910_SPD.zip 708 MB /file/intex-cloud-matte-102588
Intex Aqua Young Intex_Aqua_Young_V07_Indian_SER_SPD.zip 699 MB /file/intex-aqua-young-102555
Intex Turbo Xtreme Intex_Turbo_Xtreme_V04_07082015_MIRA.zip 16 MB /file/intex-turbo-xtreme-102755
Intex Yuvi LX Intex_Yuvi_LX_V09_IND_SER_20140115_MIRA.zip 7 MB /file/intex-yuvi-lx-102799

Frequently asked questions

Which flash tools are commonly used for Intex phones?

Based on recent files, the most common tools are SP Flash Tool and SPD ResearchDownload (or UpgradeDownload).

What is the risk of using Format All + Download on MediaTek devices?

Using Format All + Download erases IMEI and NVRAM calibration data; it is recommended to use Download Only.

How do I connect an Intex phone to SPD ResearchDownload?

Press Start in the tool, then connect the powered-off phone while holding the Volume Down boot key.

Firmware files for this guide

This guide was drafted with AI assistance from File Firmware's firmware database and reviewed and edited by Admin. Flashing always carries some risk — if a step doesn't match what you see on your device, stop and tell us.

More guides