Intex

Intex Turbo Duoz

Intex_Turbo_Duoz_V03_SC6531_MIRA.zip
June 16, 2026 Intex 4 MB Intex

Intex Turbo Duoz is a Intex firmware file listed under Intex, distributed as Intex_Turbo_Duoz_V03_SC6531_MIRA.zip with a download size of 4 MB. It is built for the Unisoc (Spreadtrum) SC6531 chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
4 MB
Download Free

About Intex Turbo Duoz

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Intex Turbo Duoz owners, this page hosts the original Intex stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Intex Turbo Duoz a fresh start without the clutter that builds up over time. File Name: Intex_Turbo_Duoz_V03_SC6531_MIRA.zip File Size: 4 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Intex Turbo Duoz should run like a brand new unit.

File Details

File nameIntex Turbo Duoz
PackageIntex_Turbo_Duoz_V03_SC6531_MIRA.zip
Brand / PlatformIntex
CategoryIntex
ChipsetUnisoc (Spreadtrum) SC6531
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size4 MB
Date addedJune 16, 2026
PriceFree

How to flash Intex Turbo Duoz with SPD ResearchDownload

  1. Confirm Intex Turbo Duoz matches your exact device model and that the phone uses the SC6531 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (4 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Intex Turbo Duoz free to download?

Yes, Intex Turbo Duoz can be downloaded free of charge from this page.

How large is the download?

The Intex Turbo Duoz package is 4 MB.

Which tool do I need to flash Intex Turbo Duoz?

Intex Turbo Duoz is Unisoc (Spreadtrum) SC6531 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

More Intex files

Back to Intex