Intex

Intex Cloud Matte

Intex_Cloud_Matte_V06_Indian_SER_20160910_SPD.zip
June 16, 2026 Intex 708 MB Intex

Intex Cloud Matte is a Intex firmware file listed under Intex, distributed as Intex_Cloud_Matte_V06_Indian_SER_20160910_SPD.zip with a download size of 708 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of September 10, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
708 MB
Download Free

About Intex Cloud Matte

If your Intex Cloud Matte has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Intex flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Intex Cloud Matte to factory condition. File Name: Intex_Cloud_Matte_V06_Indian_SER_20160910_SPD.zip File Size: 708 MB Back up your files, charge the Intex Cloud Matte past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Intex Cloud Matte should run like a brand new unit.

File Details

File nameIntex Cloud Matte
PackageIntex_Cloud_Matte_V06_Indian_SER_20160910_SPD.zip
Brand / PlatformIntex
CategoryIntex
PlatformUnisoc (Spreadtrum)
Build dateSeptember 10, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size708 MB
Date addedJune 16, 2026
PriceFree

How to flash Intex Cloud Matte with SPD ResearchDownload

  1. Confirm Intex Cloud Matte matches your exact device model and that it is intended for Intex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (708 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Intex Cloud Matte free to download?

Yes, Intex Cloud Matte can be downloaded free of charge from this page.

How large is the download?

The Intex Cloud Matte package is 708 MB.

Which tool do I need to flash Intex Cloud Matte?

Intex Cloud Matte is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

More Intex files

Back to Intex