Intex Cloud Zest
Intex Cloud Zest is a Intex firmware file listed under Intex, distributed as Intex_Cloud_Zest_V02_Indian_SER_SPD.zip with a download size of 584 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Intex Cloud Zest
Looking for the official stock firmware for your Intex Cloud Zest? You're in the right place. Below is the original Intex flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Intex Cloud Zest back to square one. File Name: Intex_Cloud_Zest_V02_Indian_SER_SPD.zip File Size: 584 MB Back up your files, charge the Intex Cloud Zest past 50 percent, install the matching drivers, and only then begin. Once installed, your Intex Cloud Zest should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Intex Cloud Zest |
|---|---|
| Package | Intex_Cloud_Zest_V02_Indian_SER_SPD.zip |
| Brand / Platform | Intex |
| Category | Intex |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 584 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Intex Cloud Zest with SPD ResearchDownload
- Confirm Intex Cloud Zest matches your exact device model and that it is intended for Intex hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (584 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Intex Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Intex device, you must use a stock ROM that matches your specific model and the corresponding flashing tool for its chipset. Most Intex devices utilize either MediaTek or…
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
Frequently asked questions
Is Intex Cloud Zest free to download?
Yes, Intex Cloud Zest can be downloaded free of charge from this page.
How large is the download?
The Intex Cloud Zest package is 584 MB.
Which tool do I need to flash Intex Cloud Zest?
Intex Cloud Zest is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Intex devices. Always confirm it matches your specific model before flashing.