Acer Iconia Tab 10 A3-A40
Acer Iconia Tab 10 A3-A40 is a Acer firmware file listed under Acer, distributed as Acer_Iconia_Tab_10_A3-A40_MT8163_0.013.00_WW_GEN1_010516_6.0.zip with a download size of 1.2 GB. It is built for the MediaTek MT8163 chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Acer Iconia Tab 10 A3-A40
If your Acer Iconia Tab 10 A3-A40 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Acer flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Acer Iconia Tab 10 A3-A40 a fresh start without the clutter that builds up over time. File Name: Acer_Iconia_Tab_10_A3-A40_MT8163_0.013.00_WW_GEN1_010516_6.0.zip File Size: 1.2 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Acer Iconia Tab 10 A3-A40 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Acer Iconia Tab 10 A3-A40 |
|---|---|
| Package | Acer_Iconia_Tab_10_A3-A40_MT8163_0.013.00_WW_GEN1_010516_6.0.zip |
| Brand / Platform | Acer |
| Category | Acer |
| Chipset | MediaTek MT8163 |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Acer Iconia Tab 10 A3-A40 with SP Flash Tool
- Confirm Acer Iconia Tab 10 A3-A40 matches your exact device model and that the phone uses the MT8163 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Acer Iconia Tab 10 A3-A40 free to download?
Yes, Acer Iconia Tab 10 A3-A40 can be downloaded free of charge from this page.
How large is the download?
The Acer Iconia Tab 10 A3-A40 package is 1.2 GB.
Which tool do I need to flash Acer Iconia Tab 10 A3-A40?
Acer Iconia Tab 10 A3-A40 is MediaTek MT8163 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Acer Iconia Tab 10 A3-A40?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Acer devices. Always confirm it matches your specific model before flashing.