Acer Liquid Z410
Acer Liquid Z410 is a Acer firmware file listed under Acer, distributed as Acer_Liquid_Z410_MT6732M_08062015_4.4.4.zip with a download size of 872 MB. It is built for the MediaTek MT6732M chipset and runs Android 4.4 (KitKat), with a firmware build date of June 08, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Acer Liquid Z410
If your Acer Liquid Z410 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Acer flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Acer_Liquid_Z410_MT6732M_08062015_4.4.4.zip File Size: 872 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Acer Liquid Z410 should run like a brand new unit.
File Details
| File name | Acer Liquid Z410 |
|---|---|
| Package | Acer_Liquid_Z410_MT6732M_08062015_4.4.4.zip |
| Brand / Platform | Acer |
| Category | Acer |
| Chipset | MediaTek MT6732M |
| Android version | Android 4.4 (KitKat) |
| Build date | June 08, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 872 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Acer Liquid Z410 with SP Flash Tool
- Confirm Acer Liquid Z410 matches your exact device model and that the phone uses the MT6732M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (872 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Acer Liquid Z410 free to download?
Yes, Acer Liquid Z410 can be downloaded free of charge from this page.
How large is the download?
The Acer Liquid Z410 package is 872 MB.
Which tool do I need to flash Acer Liquid Z410?
Acer Liquid Z410 is MediaTek MT6732M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Acer Liquid Z410?
This firmware is Android 4.4 (KitKat), built on June 08, 2015.
Which devices is this firmware for?
This file is intended for Acer devices. Always confirm it matches your specific model before flashing.