Jiake I9500W Plus Stock Firmware
Jiake I9500W Plus Stock Firmware is a Jiake firmware file listed under Jiake, distributed as Jiake_I9500W_Plus_MTK6582_4.2.2_OTA.zip with a download size of 288 MB. It was published on June 16, 2026. This page has been viewed 2 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Jiake I9500W Plus Stock Firmware
Here you will find all the latest Jiake firmware for Jiake I9500W Plus. If you are looking for Jiake I9500W Plus stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Jiake I9500W Plus, if it is not, then flashing the below stock firmware can brick your device. The Jiake I9500W Plus firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Jiake I9500W Plus Firmware File Name : Jiake_I9500W_Plus_MTK6582_4.2.2_OTA.zip File Size : 288 MB Get Firmware Also: Jiake V5 Stock Firmware How To Flash Jiake I9500W Plus Stock Firmware Step 1 : Download the Jiake I9500W Plus firmware package on your computer. Step 2 : Transfer the firmware to your phone. Step 3 : Power off your phone and boot into Recovery Mode. Step 4 : Install/flash the firmware package from Recovery. Step 6 : Reboot your phone. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Jiake I9500W Plus device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Jiake I9500W Plus Stock Firmware |
|---|---|
| Package | Jiake_I9500W_Plus_MTK6582_4.2.2_OTA.zip |
| Brand / Platform | Jiake |
| Category | Jiake |
| File size | 288 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Jiake I9500W Plus Stock Firmware matches your exact device model and that it is intended for Jiake hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (288 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Jiake I9500W Plus Stock Firmware free to download?
Yes, Jiake I9500W Plus Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Jiake I9500W Plus Stock Firmware package is 288 MB.
Which devices is this firmware for?
This file is intended for Jiake devices. Always confirm it matches your specific model before flashing.