Jiake G900W Stock Firmware
Jiake G900W Stock Firmware is a Jiake firmware file listed under Jiake, distributed as Jiake_G900W_MT6582_20140718_4.4.2.zip with a download size of 339 MB. It was published on June 16, 2026. This page has been viewed 2 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Jiake G900W Stock Firmware
Here you will find all the latest Jiake firmware for Jiake G900W. If you are looking for Jiake G900W stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Jiake G900W, if it is not, then flashing the below stock firmware can brick your device. The Jiake G900W firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Jiake G900W Firmware File Name : Jiake_G900W_MT6582_20140718_4.4.2.zip File Size : 339 MB Get Firmware Also: Jiake F1W Stock Firmware How To Flash Jiake G900W Stock Firmware Download and extract the Jiake G900W firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Jiake G900W firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Jiake G900W device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Jiake G900W device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Jiake G900W Stock Firmware |
|---|---|
| Package | Jiake_G900W_MT6582_20140718_4.4.2.zip |
| Brand / Platform | Jiake |
| Category | Jiake |
| File size | 339 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Jiake G900W Stock Firmware matches your exact device model and that it is intended for Jiake hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (339 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Jiake G900W Stock Firmware free to download?
Yes, Jiake G900W Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Jiake G900W Stock Firmware package is 339 MB.
Which devices is this firmware for?
This file is intended for Jiake devices. Always confirm it matches your specific model before flashing.