Zumm E60 Stock Firmware
Zumm E60 Stock Firmware is a Zumm firmware file listed under Zumm, distributed as Zumm_E60_MT6572_20170130_4.4.2.zip with a download size of 652 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat), with a firmware build date of January 30, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 22 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Zumm E60 Stock Firmware
Here you will find all the latest Zumm firmware for Zumm E60. If you are looking for Zumm E60 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Zumm E60, if it is not, then flashing the below stock firmware can brick your device. The Zumm E60 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Zumm E60 Firmware File Name : Zumm_E60_MT6572_20170130_4.4.2.zip File Size : 652 MB Get Firmware Also: Zumm Titan Stock Firmware How To Flash Zumm E60 Stock Firmware Download and extract the Zumm E60 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Zumm E60 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Zumm E60 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Zumm E60 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Zumm E60 Stock Firmware |
|---|---|
| Package | Zumm_E60_MT6572_20170130_4.4.2.zip |
| Brand / Platform | Zumm |
| Category | Zumm |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.4 (KitKat) |
| Build date | January 30, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 652 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Zumm E60 Stock Firmware with SP Flash Tool
- Confirm Zumm E60 Stock Firmware matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (652 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Zumm E60 Stock Firmware free to download?
Yes, Zumm E60 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Zumm E60 Stock Firmware package is 652 MB.
Which tool do I need to flash Zumm E60 Stock Firmware?
Zumm E60 Stock Firmware is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Zumm E60 Stock Firmware?
This firmware is Android 4.4 (KitKat), built on January 30, 2017.
Which devices is this firmware for?
This file is intended for Zumm devices. Always confirm it matches your specific model before flashing.