Zumm E60
Zumm E60 is a Zumm firmware file listed under Zumm, distributed as Zumm_E60_MT6572_20170130_4.4.2.ZIP with a download size of 652 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat), with a firmware build date of January 30, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 140 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Zumm E60
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Zumm E60 owners, this page hosts the original Zumm stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Zumm E60 back to square one. File Name: Zumm_E60_MT6572_20170130_4.4.2.ZIP File Size: 652 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Zumm E60 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Zumm E60 |
|---|---|
| Package | Zumm_E60_MT6572_20170130_4.4.2.ZIP |
| Brand / Platform | Zumm |
| Category | Zumm |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.4 (KitKat) |
| Build date | January 30, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 652 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Zumm E60 with SP Flash Tool
- Confirm Zumm E60 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (652 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Zumm E60 free to download?
Yes, Zumm E60 can be downloaded free of charge from this page.
How large is the download?
The Zumm E60 package is 652 MB.
Which tool do I need to flash Zumm E60?
Zumm E60 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Zumm E60?
This firmware is Android 4.4 (KitKat), built on January 30, 2017.
Which devices is this firmware for?
This file is intended for Zumm devices. Always confirm it matches your specific model before flashing.