ACI

ACI Stylus Q80 Stock Firmware

ACI_Stylus_Q80_MT6580_V1.2_20170908.zip
June 16, 2026 ACI 722 MB ACI

ACI Stylus Q80 Stock Firmware is a ACI firmware file listed under ACI, distributed as ACI_Stylus_Q80_MT6580_V1.2_20170908.zip with a download size of 722 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of September 08, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
722 MB
Download Free

About ACI Stylus Q80 Stock Firmware

Here you will find all the latest ACI firmware for ACI Stylus Q80. If you are looking for ACI Stylus Q80 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is ACI Stylus Q80, if it is not, then flashing the below stock firmware can brick your device. The ACI Stylus Q80 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download ACI Stylus Q80 Firmware File Name : ACI_Stylus_Q80_MT6580_V1.2_20170908.zip File Size : 722 MB Get Firmware Also: ACI Stylus O65 Stock Firmware How To Flash ACI Stylus Q80 Stock Firmware Download and extract the ACI Stylus Q80 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the ACI Stylus Q80 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your ACI Stylus Q80 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your ACI Stylus Q80 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

File nameACI Stylus Q80 Stock Firmware
PackageACI_Stylus_Q80_MT6580_V1.2_20170908.zip
Brand / PlatformACI
CategoryACI
ChipsetMediaTek MT6580
Build dateSeptember 08, 2017
Flash toolSP Flash Tool
Package formatZIP archive
File size722 MB
Date addedJune 16, 2026
PriceFree

How to flash ACI Stylus Q80 Stock Firmware with SP Flash Tool

  1. Confirm ACI Stylus Q80 Stock Firmware matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (722 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is ACI Stylus Q80 Stock Firmware free to download?

Yes, ACI Stylus Q80 Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The ACI Stylus Q80 Stock Firmware package is 722 MB.

Which tool do I need to flash ACI Stylus Q80 Stock Firmware?

ACI Stylus Q80 Stock Firmware is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for ACI devices. Always confirm it matches your specific model before flashing.

More ACI files

Back to ACI