Adcom A500 HD 3G Stock Firmware
Adcom A500 HD 3G Stock Firmware is a Adcom firmware file listed under Adcom, distributed as Adcom_A500_HD_3G_MT6577_V001_07042013.zip with a download size of 425 MB. It is built for the MediaTek MT6577 chipset, with a firmware build date of April 07, 2013. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Adcom A500 HD 3G Stock Firmware
Here you will find all the latest Adcom firmware for Adcom A500 HD 3G. If you are looking for Adcom A500 HD 3G stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Adcom A500 HD 3G, if it is not, then flashing the below stock firmware can brick your device. The Adcom A500 HD 3G firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Adcom A500 HD 3G Firmware File Name : Adcom_A500_HD_3G_MT6577_V001_07042013.zip File Size : 425 MB Get Firmware Also: Adcom X14 Stock Firmware How To Flash Adcom A500 HD 3G Stock Firmware Download and extract the Adcom A500 HD 3G firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Adcom A500 HD 3G firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Adcom A500 HD 3G device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Adcom A500 HD 3G device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Adcom A500 HD 3G Stock Firmware |
|---|---|
| Package | Adcom_A500_HD_3G_MT6577_V001_07042013.zip |
| Brand / Platform | Adcom |
| Category | Adcom |
| Chipset | MediaTek MT6577 |
| Build date | April 07, 2013 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 425 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Adcom A500 HD 3G Stock Firmware with SP Flash Tool
- Confirm Adcom A500 HD 3G Stock Firmware matches your exact device model and that the phone uses the MT6577 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (425 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Adcom A500 HD 3G Stock Firmware free to download?
Yes, Adcom A500 HD 3G Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Adcom A500 HD 3G Stock Firmware package is 425 MB.
Which tool do I need to flash Adcom A500 HD 3G Stock Firmware?
Adcom A500 HD 3G Stock Firmware is MediaTek MT6577 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Adcom devices. Always confirm it matches your specific model before flashing.