Adcom Guru X10
Adcom Guru X10 is a Adcom firmware file listed under Adcom, distributed as Adcom_Guru_X10_V23_090814_SPD.zip with a download size of 3 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Adcom Guru X10
Looking for the official stock firmware for your Adcom Guru X10? You're in the right place. Below is the original Adcom flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Adcom Guru X10 back to square one. File Name: Adcom_Guru_X10_V23_090814_SPD.zip File Size: 3 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Adcom Guru X10 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Adcom Guru X10 |
|---|---|
| Package | Adcom_Guru_X10_V23_090814_SPD.zip |
| Brand / Platform | Adcom |
| Category | Adcom |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 3 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Adcom Guru X10 with SPD ResearchDownload
- Confirm Adcom Guru X10 matches your exact device model and that it is intended for Adcom hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Adcom Guru X10 free to download?
Yes, Adcom Guru X10 can be downloaded free of charge from this page.
How large is the download?
The Adcom Guru X10 package is 3 MB.
Which tool do I need to flash Adcom Guru X10?
Adcom Guru X10 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Adcom devices. Always confirm it matches your specific model before flashing.