Itel S15 W6002
Itel S15 W6002 is a Itel firmware file listed under Itel, distributed as Itel_S15_W6002_V037_20191015_9.0_SPD.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 9 (Pie), with a firmware build date of October 15, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel S15 W6002
Itel S15 W6002 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Itel_S15_W6002_V037_20191015_9.0_SPD.zip File Size: 1 GB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Itel S15 W6002 |
|---|---|
| Package | Itel_S15_W6002_V037_20191015_9.0_SPD.zip |
| Brand / Platform | Itel |
| Category | Itel |
| Platform | Unisoc (Spreadtrum) |
| Android version | Android 9 (Pie) |
| Build date | October 15, 2019 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Itel S15 W6002 with SPD ResearchDownload
- Confirm Itel S15 W6002 matches your exact device model and that it is intended for Itel hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel S15 W6002 free to download?
Yes, Itel S15 W6002 can be downloaded free of charge from this page.
How large is the download?
The Itel S15 W6002 package is 1 GB.
Which tool do I need to flash Itel S15 W6002?
Itel S15 W6002 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Itel S15 W6002?
This firmware is Android 9 (Pie), built on October 15, 2019.
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.