Qmobile i9i Pro
Qmobile i9i Pro is a Qmobile firmware file listed under Qmobile, distributed as Qmobile_i9i_Pro_MT6580_V06_20160301_7.0.zip with a download size of 879 MB. It is built for the MediaTek MT6580 chipset and runs Android 7.0 (Nougat), with a firmware build date of March 01, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile i9i Pro
If your Qmobile i9i Pro has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Qmobile flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Qmobile i9i Pro back to square one. File Name: Qmobile_i9i_Pro_MT6580_V06_20160301_7.0.zip File Size: 879 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Qmobile i9i Pro returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Qmobile i9i Pro |
|---|---|
| Package | Qmobile_i9i_Pro_MT6580_V06_20160301_7.0.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6580 |
| Android version | Android 7.0 (Nougat) |
| Build date | March 01, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 879 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile i9i Pro with SP Flash Tool
- Confirm Qmobile i9i Pro matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (879 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Qmobile i9i Pro free to download?
Yes, Qmobile i9i Pro can be downloaded free of charge from this page.
How large is the download?
The Qmobile i9i Pro package is 879 MB.
Which tool do I need to flash Qmobile i9i Pro?
Qmobile i9i Pro is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Qmobile i9i Pro?
This firmware is Android 7.0 (Nougat), built on March 01, 2016.
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.