Nokia 3 TA-1020
Nokia 3 TA-1020 is a Nokia firmware file listed under Nokia, distributed as Nokia_3_TA-1020_MT6737M_NE1-5180-0-00WW-B03_ROM.zip with a download size of 1.46 GB. It is built for the MediaTek MT6737M chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Nokia 3 TA-1020
The Nokia 3 TA-1020 runs on Nokia's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Nokia 3 TA-1020 back to square one. File Name: Nokia_3_TA-1020_MT6737M_NE1-5180-0-00WW-B03_ROM.zip File Size: 1.46 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Nokia 3 TA-1020 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Nokia 3 TA-1020 |
|---|---|
| Package | Nokia_3_TA-1020_MT6737M_NE1-5180-0-00WW-B03_ROM.zip |
| Brand / Platform | Nokia |
| Category | Nokia |
| Chipset | MediaTek MT6737M |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.46 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Nokia 3 TA-1020 with SP Flash Tool
- Confirm Nokia 3 TA-1020 matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.46 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Nokia 3 TA-1020 free to download?
Yes, Nokia 3 TA-1020 can be downloaded free of charge from this page.
How large is the download?
The Nokia 3 TA-1020 package is 1.46 GB.
Which tool do I need to flash Nokia 3 TA-1020?
Nokia 3 TA-1020 is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Nokia devices. Always confirm it matches your specific model before flashing.