Micromax Q437 Go
Micromax Q437 Go is a Micromax firmware file listed under Micromax, distributed as Micromax_Q437_Go_MT6737M_SW_V14_HW_V1.0_20180404.ZIP with a download size of 657 MB. It is built for the MediaTek MT6737M chipset, with a firmware build date of April 04, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax Q437 Go
If your Micromax Q437 Go has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Micromax flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Micromax Q437 Go to factory condition. File Name: Micromax_Q437_Go_MT6737M_SW_V14_HW_V1.0_20180404.ZIP File Size: 657 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Micromax Q437 Go restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Micromax Q437 Go |
|---|---|
| Package | Micromax_Q437_Go_MT6737M_SW_V14_HW_V1.0_20180404.ZIP |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6737M |
| Build date | April 04, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 657 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax Q437 Go with SP Flash Tool
- Confirm Micromax Q437 Go matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (657 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Micromax Q437 Go free to download?
Yes, Micromax Q437 Go can be downloaded free of charge from this page.
How large is the download?
The Micromax Q437 Go package is 657 MB.
Which tool do I need to flash Micromax Q437 Go?
Micromax Q437 Go is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.