Micromax Q353
Micromax Q353 is a Micromax firmware file listed under Micromax, distributed as Micromax_Q353_MT6580_12042017_7.0.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset and runs Android 7.0 (Nougat), with a firmware build date of April 12, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax Q353
Looking for the official stock firmware for your Micromax Q353? You're in the right place. Below is the original Micromax flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Micromax Q353 to factory condition. File Name: Micromax_Q353_MT6580_12042017_7.0.zip File Size: 1 GB Back up your files, charge the Micromax Q353 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Micromax Q353 should run like a brand new unit.
File Details
| File name | Micromax Q353 |
|---|---|
| Package | Micromax_Q353_MT6580_12042017_7.0.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6580 |
| Android version | Android 7.0 (Nougat) |
| Build date | April 12, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax Q353 with SP Flash Tool
- Confirm Micromax Q353 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Micromax Q353 free to download?
Yes, Micromax Q353 can be downloaded free of charge from this page.
How large is the download?
The Micromax Q353 package is 1 GB.
Which tool do I need to flash Micromax Q353?
Micromax Q353 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Micromax Q353?
This firmware is Android 7.0 (Nougat), built on April 12, 2017.
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.