Lenovo Tab 3 7 Essential TB3-710I
Lenovo Tab 3 7 Essential TB3-710I is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_Tab_3_7_Essential_TB3-710I_MT6580_HW30_S000035_170327.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo Tab 3 7 Essential TB3-710I
The Lenovo Tab 3 7 Essential TB3-710I runs on Lenovo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lenovo_Tab_3_7_Essential_TB3-710I_MT6580_HW30_S000035_170327.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Lenovo Tab 3 7 Essential TB3-710I restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Lenovo Tab 3 7 Essential TB3-710I |
|---|---|
| Package | Lenovo_Tab_3_7_Essential_TB3-710I_MT6580_HW30_S000035_170327.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6580 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo Tab 3 7 Essential TB3-710I with SP Flash Tool
- Confirm Lenovo Tab 3 7 Essential TB3-710I matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Lenovo Tab 3 7 Essential TB3-710I free to download?
Yes, Lenovo Tab 3 7 Essential TB3-710I can be downloaded free of charge from this page.
How large is the download?
The Lenovo Tab 3 7 Essential TB3-710I package is 1 GB.
Which tool do I need to flash Lenovo Tab 3 7 Essential TB3-710I?
Lenovo Tab 3 7 Essential TB3-710I is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.