Itel V41 W4001S
Itel V41 W4001S is a Itel firmware file listed under Itel, distributed as Itel_V41_W4001S_SC7731E_V002_200825_SPD.zip.zip with a download size of 873 MB. It is built for the Unisoc (Spreadtrum) SC7731E chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel V41 W4001S
Looking for the official stock firmware for your Itel V41 W4001S? You're in the right place. Below is the original Itel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Itel_V41_W4001S_SC7731E_V002_200825_SPD.zip.zip File Size: 873 MB Back up your files, charge the Itel V41 W4001S past 50 percent, install the matching drivers, and only then begin. Once installed, your Itel V41 W4001S should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Itel V41 W4001S |
|---|---|
| Package | Itel_V41_W4001S_SC7731E_V002_200825_SPD.zip.zip |
| Brand / Platform | Itel |
| Category | Itel |
| Chipset | Unisoc (Spreadtrum) SC7731E |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 873 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Itel V41 W4001S with SPD ResearchDownload
- Confirm Itel V41 W4001S matches your exact device model and that the phone uses the SC7731E chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (873 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel V41 W4001S free to download?
Yes, Itel V41 W4001S can be downloaded free of charge from this page.
How large is the download?
The Itel V41 W4001S package is 873 MB.
Which tool do I need to flash Itel V41 W4001S?
Itel V41 W4001S is Unisoc (Spreadtrum) SC7731E firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.