Itel IT9300
Itel IT9300 is a Itel firmware file listed under Itel, distributed as Itel_IT9300_D70A_EnFrSwPoAr_TZ-TIGO_200804_SPD.zip with a download size of 166 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel IT9300
If your Itel IT9300 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Itel flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Itel IT9300 a fresh start without the clutter that builds up over time. File Name: Itel_IT9300_D70A_EnFrSwPoAr_TZ-TIGO_200804_SPD.zip File Size: 166 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Itel IT9300 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Itel IT9300 |
|---|---|
| Package | Itel_IT9300_D70A_EnFrSwPoAr_TZ-TIGO_200804_SPD.zip |
| Brand / Platform | Itel |
| Category | Itel |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 166 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Itel IT9300 with SPD ResearchDownload
- Confirm Itel IT9300 matches your exact device model and that it is intended for Itel hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (166 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel IT9300 free to download?
Yes, Itel IT9300 can be downloaded free of charge from this page.
How large is the download?
The Itel IT9300 package is 166 MB.
Which tool do I need to flash Itel IT9300?
Itel IT9300 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.