Itel IT7100
Itel IT7100 is a Itel firmware file listed under Itel, distributed as Itel_IT7100_SC6532CA_20170814_FSPD.zip with a download size of 7 MB. It is built for the Unisoc (Spreadtrum) SC6532C chipset, with a firmware build date of August 14, 2017. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel IT7100
If your Itel IT7100 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Itel flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Itel IT7100 back to square one. File Name: Itel_IT7100_SC6532CA_20170814_FSPD.zip File Size: 7 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Itel IT7100 should run like a brand new unit.
File Details
| File name | Itel IT7100 |
|---|---|
| Package | Itel_IT7100_SC6532CA_20170814_FSPD.zip |
| Brand / Platform | Itel |
| Category | Itel |
| Chipset | Unisoc (Spreadtrum) SC6532C |
| Build date | August 14, 2017 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 7 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Itel IT7100 with SPD ResearchDownload
- Confirm Itel IT7100 matches your exact device model and that the phone uses the SC6532C chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (7 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel IT7100 free to download?
Yes, Itel IT7100 can be downloaded free of charge from this page.
How large is the download?
The Itel IT7100 package is 7 MB.
Which tool do I need to flash Itel IT7100?
Itel IT7100 is Unisoc (Spreadtrum) SC6532C firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.