Walton Primo RX8
Walton Primo RX8 is a Walton firmware file listed under Walton, distributed as Walton_Primo_RX8_MT6765_2201_T2026_080121.zip with a download size of 1.93 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo RX8
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Walton Primo RX8 owners, this page hosts the original Walton stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Walton Primo RX8 to factory condition. File Name: Walton_Primo_RX8_MT6765_2201_T2026_080121.zip File Size: 1.93 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Walton Primo RX8 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Walton Primo RX8 |
|---|---|
| Package | Walton_Primo_RX8_MT6765_2201_T2026_080121.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6765 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.93 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo RX8 with SP Flash Tool
- Confirm Walton Primo RX8 matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.93 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Walton Primo RX8 free to download?
Yes, Walton Primo RX8 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo RX8 package is 1.93 GB.
Which tool do I need to flash Walton Primo RX8?
Walton Primo RX8 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.