Walton Primo RX7 Mini
Walton Primo RX7 Mini is a Walton firmware file listed under Walton, distributed as Walton_Primo_RX7_Mini_MT6752_Dump_File_UFI_Box_201220.zip with a download size of 213 MB. It is built for the MediaTek MT6752 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo RX7 Mini
Looking for the official stock firmware for your Walton Primo RX7 Mini? You're in the right place. Below is the original Walton flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Walton Primo RX7 Mini back to square one. File Name: Walton_Primo_RX7_Mini_MT6752_Dump_File_UFI_Box_201220.zip File Size: 213 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Walton Primo RX7 Mini restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Walton Primo RX7 Mini |
|---|---|
| Package | Walton_Primo_RX7_Mini_MT6752_Dump_File_UFI_Box_201220.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6752 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 213 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo RX7 Mini with SP Flash Tool
- Confirm Walton Primo RX7 Mini matches your exact device model and that the phone uses the MT6752 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (213 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Walton Primo RX7 Mini free to download?
Yes, Walton Primo RX7 Mini can be downloaded free of charge from this page.
How large is the download?
The Walton Primo RX7 Mini package is 213 MB.
Which tool do I need to flash Walton Primo RX7 Mini?
Walton Primo RX7 Mini is MediaTek MT6752 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.