Walton Primo N4
Walton Primo N4 is a Walton firmware file listed under Walton, distributed as Walton_Primo_N4_MT6763_SW04_090120.zip with a download size of 1.63 GB. It is built for the MediaTek MT6763 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 21 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo N4
If your Walton Primo N4 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Walton flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Walton_Primo_N4_MT6763_SW04_090120.zip File Size: 1.63 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Walton Primo N4 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Walton Primo N4 |
|---|---|
| Package | Walton_Primo_N4_MT6763_SW04_090120.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6763 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.63 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo N4 with SP Flash Tool
- Confirm Walton Primo N4 matches your exact device model and that the phone uses the MT6763 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.63 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Walton Primo N4 free to download?
Yes, Walton Primo N4 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo N4 package is 1.63 GB.
Which tool do I need to flash Walton Primo N4?
Walton Primo N4 is MediaTek MT6763 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.